A7004730 启动错误，请求援助
p5 55a 公司发过来的一台测试机，启动到A7004730后，没有任何反应，查硬件中心，解释Response
A problem occurred when configuring the logical partitions on the system. More resources were allocated than there are available for use. Either obtain more capacity by obtaining new activation codes or allocate fewer resources in the LPAR configuration.
不知道怎么解决，请求帮助
A problem occurred when configuring the logical partitions on the system. More resources were allocated than there are available for use. Either obtain more capacity by obtaining new activation codes or allocate fewer resources in the LPAR configuration.
不知道怎么解决，请求帮助
5同行回答
Two processors, memory added in quads
Memory should be balanced on each processor card.
Plug the first quad of memory modules into memory module slots P1-C8-C1, P1-C8-C3, P1-C8-C6, and P1-C8-C8 on each processor card, or slots P1-C9-C1, P1-C9-C3, P1-C9-C6, and P1-C9-C8 on each processor card.
Plug the second quad of memory modules into memory module slots P1-C8-C2, P1-C8-C4, P1-C8-C5, and P1-C8-C7 on each processor card, or slots P1-C9-C2, P1-C9-C4, P1-C9-C5, and P1-C9-C7 on each processor card.
我只有4根内存，一个上面插了一组，我错了收起
Memory should be balanced on each processor card.
Plug the first quad of memory modules into memory module slots P1-C8-C1, P1-C8-C3, P1-C8-C6, and P1-C8-C8 on each processor card, or slots P1-C9-C1, P1-C9-C3, P1-C9-C6, and P1-C9-C8 on each processor card.
Plug the second quad of memory modules into memory module slots P1-C8-C2, P1-C8-C4, P1-C8-C5, and P1-C8-C7 on each processor card, or slots P1-C9-C2, P1-C9-C4, P1-C9-C5, and P1-C9-C7 on each processor card.
我只有4根内存，一个上面插了一组，我错了收起
浏览2216
ASMI里面已经做过恢复出厂设置步骤。收起
浏览2393
There is a configuration problem with the system or a logical partition.
Perform any actions listed in the "Description/Action" column in the unit reference code table for the reference code.
Have the customer check processor and memory allocations of the system or to the partition. The customer must ensure that there are enough functioning processor and memory resources in the system for all the partitions. Processor or memory resources that failed during the system IPL could have caused the IPL problem in the partition.
Have the customer check the bus and I/O processor allocations for the partition. The customer must ensure that the partition has load source and console I/O resources.
Have the customer check the IPL mode of the system or failing partition.
For further assistance, the customer should contact their software service provider, or see Logical partitioning for additional support.收起
Perform any actions listed in the "Description/Action" column in the unit reference code table for the reference code.
Have the customer check processor and memory allocations of the system or to the partition. The customer must ensure that there are enough functioning processor and memory resources in the system for all the partitions. Processor or memory resources that failed during the system IPL could have caused the IPL problem in the partition.
Have the customer check the bus and I/O processor allocations for the partition. The customer must ensure that the partition has load source and console I/O resources.
Have the customer check the IPL mode of the system or failing partition.
For further assistance, the customer should contact their software service provider, or see Logical partitioning for additional support.收起
浏览1982